Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Fort Worth crews are already moving. We dispatch Fort Worth units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.
Hirex Water Damage started because homeowners in Fort Worth, TX kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Fort Worth roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our senior technicians are IICRC-certified and have worked everything from a clean supply-line break to a full sewage backup, so Water Damage Repair in Fort Worth isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Fort Worth, TX, so you're protected from the moment our truck pulls into the driveway.
Because our equipment lives in a Fort Worth, TX warehouse rather than out of state, we're not waiting on a supply run before we can start extraction.
Ask any Fort Worth property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Fort Worth call at a time.
The most expensive Fort Worth restoration jobs we run almost never started as a dramatic flood; they started as something small that got put off. Here's what tells us a property needs professional attention rather than a mop and a fan:
If any of that sounds familiar, don't wait for it to get worse — call our Fort Worth line and we'll tell you honestly whether it's a same-day emergency or something we can schedule.
We size the Fort Worth response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
Our Fort Worth units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Our drying plans use moisture meters and thermal imaging to target air movers exactly where hidden moisture is trapped, with daily drying logs so you can see the numbers improving, not just take our word for it.
On the residential side in Fort Worth, we handle the flood-cut, subfloor checks, and content pack-out so your home is ready to rebuild, with clear photo documentation at every stage for your insurance claim.
For commercial Fort Worth accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Blackwater losses in Fort Worth get handled under strict Category 3 protocol: containment, PPE, antimicrobial application, and documented disposal of contaminated materials.
On top of standard drying, our Fort Worth crews treat affected materials to reduce mold risk and will be upfront if a section needs specialist remediation.
Every Fort Worth estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Because our equipment cache sits inside Fort Worth, TX, most Fort Worth calls see a technician on-site in under 60 minutes.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
Final moisture readings have to hit dry-standard before we consider a Fort Worth job done, and getting there again is on us, not you.
A short call with our Fort Worth dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
The closest available technician is routed to your Fort Worth property with equipment staged and ready.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Our Fort Worth technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
That's not a marketing line — it's written into every Fort Worth work order we issue. If a second visit is ever needed, it comes from the same crew that handled the original job whenever scheduling allows, since they already know the property and the readings we started from.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"The drying logs they left behind actually made sense — I could see the numbers dropping every day until it was done." — Priya S.
"A supply line failure flooded our kitchen and this crew had us reopened in under a week — much faster than we expected." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Most Fort Worth dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
Yes — every Fort Worth job gets a written estimate before equipment is turned on, and we walk through it with you line by line.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Fort Worth properties.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Fort Worth insurance claim.
Dryness is confirmed with instrument readings against a documented dry standard, not just by feeling the wall or carpet.
Yes, our Fort Worth crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
Commercial response is a regular part of our Fort Worth work — restaurants, offices, and multi-unit buildings included.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Fort Worth jobs.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
Our Fort Worth guarantee covers a 30-day callback window — if moisture shows up again from the same loss, we come back free of charge.
See the zip codes and nearby cities listed below — our Fort Worth crews cover that full radius.
Fort Worth is our home base, and our reach extends across Fort Worth, TX through a network of staged equipment and on-call technicians. If your address falls inside or near Fort Worth, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Fort Worth, Fort Worth, TXCall now and speak with a real Fort Worth dispatcher, not a national call center.
Call +1-844-833-1325